LPG evaporator technologically advanced, safe and reliable, gasification energy from the hourly 30KG to 500KG. For residential housing and commercial and industrial gas. Electric control devices and electric heaters are used explosion-proof design, explosion-proof grade Ex DIIBT4. Evaporator technology structure, durable, and has anti-corrosion. Electric control box and gasification combined structure, space-saving, convenient and practical. Evaporator pressure is detected 3.3MPa (33kg/cm2), safety rated pressure: 1.76MPa (17.6kg/cm2). Explosion-proof solenoid valve, when the gas through the liquid outlet valve closes automatically when the solenoid. Safety relief valve can be super-pressure gas discharge and then automatically turn off automatically. Two electronic thermostat automatically adjusts for temperature 60-70 degrees, gas supply stability. Second, the technical characteristics: Design pressure: 2.7MPa (27kg/cm2); hydraulic test pressure: 3.3MPa (33kg/cm2); tightness test pressure: 2.7MPa (27kg/cm2); valve opening pressure: 1.76MPa (17.6 kg/cm2); 5 vaporizer proof grade: D Ⅱ Bt4; Operating temperature: 50 ℃ -80 ℃. Third, Use: Pipeline: Serious see Dongsheng evaporator furnace marked on the text, the liquid inlet and gas outlet is connected to the corresponding pipes. Water: water indicated on the furnace by adding pure unadulterated pure distilled water or until the bottom of the furnace until the overflow. Power: This furnace system without electrical box, directly open the cover on the furnace riot, three-phase four-wire power cord from the mouth into the wiring on the furnace, the three-phase power supply to the terminal block labeled A, B , C Division, N zero line. Cover the thermostat, relay, heat pipe etc has been adjusted at the factory good measure, non-professionals are not free to mobilize. Cover, tighten the open proof cover. Fourth, the installation Specifications ABCD liquid inlet outlet 50kg / h 1200 φ400 550 260 DN25 DN25 100kg / h 1360 φ400 550 260 DN25 DN25 150kg / h 1360 φ400 550 260 DN25 DN25 200kg / h 1540 φ460 640 300 DN32 DN32 300kg / h 1723 φ560 830 318 DN40 DN40 400kg / h 1723 φ560 830 318 DN40 DN40 500kg / h 2220 φ600 1050 452 DN50 DN50 five, technical parameters: Model Power vaporization amount Pressure Temperature CPEx-50kg / h 380V / three phase four wire 7.5 kw 50kg / h 1.76MPa ≤ 60 ℃ CPEx-100kg / h 380V / three phase four wire 15kw 100kg / h 1.76MPa ≤ 60 ℃ CPEx-150kg / h 380V / three phase four wire 18kw 150kg / h 1.76MPa ≤ 60 ℃ CPEx -200kg / h 380V / three phase four wire 30kw 200kg / h 1.76MPa ≤ 60 ℃ CPEx-300kg / h 380V / three phase four wire 45kw 300kg / h 1.76MPa ≤ 60 ℃ CPEx-400kg / h 380V / three phase four wire 54kw 400kg / h 1.76MPa ≤ 60 ℃ CPEx-500kg / h 380V / three phase four wire 68kw 500kg / h 1.76MPa ≤ 60 ℃ six, technical characteristics: Item tube shell design pressure 1.77MPa pressure design temperature ≤ 60 ℃ ≤ 70 ℃ Maximum working pressure 1.76MPa atmospheric water using LPG medium temperature 50 ℃ -65 ℃ 50 ℃ -65 ℃ Main material 2 #, 16MnR Q235-A corrosion allowance coefficient of 0.85 Weld II Category II